Speed Trap Hunter Forum: Best Radar Detectors, Laser Jammers, Laser Detectors, Speed Cameras Forum  

Go Back   Speed Trap Hunter Forum: Best Radar Detectors, Laser Jammers, Laser Detectors, Speed Cameras Forum > Speed Trap Countermeasures > Cincinnati Microwave
Radar Detectors Forum Logon:


Cincinnati Microwave Discussion of Beltronics & Escort laser shifters/laser jammers, co-branded under the name of Cincinnati Microwave, and related accessories.

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)   IP: 74.78.49.198
Old 2009-08-14
vschuel vschuel is offline
Member
 
Join Date: 2008 Jan
Location: Buffalo, NY
Posts: 1
vschuel is on a distinguished road
Question Is it software or hardware related?

In relation to a post I had made earlier here on STH.net:

http://www.speedtraphunter.net/real-...-new-post.html

I had indicated that I was having a "problem" when I set my ZR4 to "receive mode" through the STi Driver. Here is a link to a post I made at Escort's online forum, hoping to get some clarification:

A "problem" with my STi Driver/ZR4 setup ??? - Escort Radar Forum

Here is the response I got from the official Escort rep on that forum:

"Two possible issues going on here. It could be a faulty shifter or there may be a software bug in your STi. Run your ZR4 without the STi plugged in and see you get the laser false at startup. You will need to watch the ZR4 display to see if you are getting the laser falsing at start-up. If this is not the problem then you should send the STi in to have it's software updated.

You can either call Betronics customer service department or you can PM me your personal information (name, address, or a previous Beltronics/Escort order number) so that I can set up your repair
."

During start-up, without my STi plugged in, the ZR4 had no issues. If I remember correctly, the ZR4 by itself is programmed to "shift" right after startup. The only time it would be in "receive mode" is after you double-tap the mute button. I then plugged my STi back into the interface, set my STi to "Blkr REC" and "Dark", and the rear shifter light on the ZR4 display module was on solid. As long as the STi Driver is set to "Blkr BLK", everything is fine. I turned the display module off, set the brightness to "Auto" on my STi, left it on "Blkr REC", and restarted everything. The STi wet through the startup sequence, then immediately started falsing on laser. It would either show "Highway" and keep falsing, or show "R Laser" and false. Why would it only false when the STi is set to "receive mode"? What do you think? Is it a software or hardware-related issue???


vschuel's Sig:VEIL G4
Laser Shield (front/rear)
Laser Interceptor Dual
Beltronics STi-R - build code 3809

LIDAR encounters: 38 (latest 2/5/2011)
LIDAR tickets: 0
RADAR tickets: last - 7/9/2010
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Red Light Camera Software and Data Sheri Whistler Support 0 2009-07-29 12:16
The Red Light Related Accident Scam NMA Reporter News 0 2009-06-08 21:54


All times are GMT -4. The time now is 23:53.


©2009 SpeedTrapHunter